Машинку отмыл от столетней грязи, а ее было в ней много, в наличии нашлись и валенки. Подключил к терминалу.
вывод в терминал
Power-ON Reset
MB86907 POST 2.2.3 03SEP96
Probing system memory: 32 0 32 0 0 0 0 0
Config = 88000022
512Kb ecache detected
1.1.1 mem ram walking ones Pass
1.1.2 mem ram address Pass
1.1.3 mem ram post r/w region Pass
1.1.4 mem ram obp r/w region Pass
1.2.1 mem control parity Pass
2.1.1 srmmu regs read/write Pass
2.2.1 srmmu ram io-tlb Pass
2.2.2 srmmu ram d-tlb Pass
2.2.3 srmmu ram pdt cache Pass
3.1.1 iommu reg read/write Pass
3.1.2 iommu reg flush individual Pass
3.1.3 iommu reg flush all Pass
3.2.1 iommu timeout ebus Pass
3.2.2 iommu timeout sbus Pass
4.1.1 fpu reg regfile Pass
4.1.2 fpu reg misalign Pass
4.1.3 fpu reg single precision Pass
4.1.4 fpu reg double precision Pass
4.2.1 fpu exceptions single precision Pass
4.2.2 fpu exceptions double precision Pass
5.1.1 cache dcache ram Pass
5.1.2 cache dcache address Pass
5.1.3 cache dcache tag Pass
5.1.4 cache dcache clear Pass
5.2.1 cache icache ram Pass
5.2.2 cache icache address Pass
5.2.3 cache icache tag Pass
5.2.4 cache icache clear Pass
5.3.1 cache ecache ram Pass
5.3.2 cache ecache address Pass
5.3.3 cache ecache tag Pass
5.4.1 cache snoop ram Pass
6.1.1 i/o counters processor user timer Pass
6.1.2 i/o counters processor counter Pass
6.1.3 i/o counters system counter Pass
6.2.1 i/o lance getid Pass
6.2.2 i/o lance csr Pass
6.2.3 i/o lance rap Pass
6.2.4 i/o lance rdp Pass
6.3.1 i/o esp register r/w Pass
6.3.2 i/o esp config reg Pass
6.3.3 i/o esp fifo access Pass
6.3.4 i/o esp command reg Pass
6.4.1 i/o pp register access Pass
6.4.2 i/o pp io readback Pass
6.4.3 i/o pp tcr readback Pass
6.5.1 i/o tod regs test Pass
6.5.2 i/o tod nvram access Pass
7.1.1 intr regs sys Pass
7.1.2 intr regs proc Pass
7.2.1 intr software interrupts disabled Pass
7.2.2 intr software interrupts enabled Pass
7.2.3 intr software multi Pass
7.3.1 intr pp Interrupts Pass
7.4.1 intr timer system counter Pass
7.4.2 intr timer process counter Pass
8.1.1 dma apc bypass Pass
initializing TLB
initializing cache
Allocating SRMMU Context Table
Setting SRMMU Context Register
Setting SRMMU Context Table Pointer Register
Allocating SRMMU Level 1 Table
Mapping RAM
Mapping ROM
ttya initialized
Probing Memory Bank #0 32 Megabytes
Probing Memory Bank #1 Nothing there
Probing Memory Bank #2 32 Megabytes
Probing Memory Bank #3 Nothing there
Probing Memory Bank #4 Nothing there
Probing Memory Bank #5 Nothing there
Probing Memory Bank #6 Nothing there
Probing Memory Bank #7 Nothing there
Starting real time clock...
Incorrect configuration checksum;
Setting NVRAM parameters to default values.
Setting diag-switch? NVRAM parameter to true
Probing CPU FMI,MB86907
Probing /iommu@0,10000000/sbus@0,10001000 at 5,0 espdma esp sd st SUNW,bpp ledm
a le
Probing /iommu@0,10000000/sbus@0,10001000 at 4,0 SUNW,CS4231 power-management
Probing /iommu@0,10000000/sbus@0,10001000 at 1,0 Nothing there
Probing /iommu@0,10000000/sbus@0,10001000 at 2,0 Nothing there
Probing /iommu@0,10000000/sbus@0,10001000 at 3,0 Nothing there
Probing /iommu@0,10000000/sbus@0,10001000 at 0,0 Nothing there
screen not found.
Can't open input device.
Keyboard not present. Using tty for input and output.
Probing Memory Bank #0 32 Megabytes
Probing Memory Bank #1 Nothing there
Probing Memory Bank #2 32 Megabytes
Probing Memory Bank #3 Nothing there
Probing Memory Bank #4 Nothing there
Probing Memory Bank #5 Nothing there
Probing Memory Bank #6 Nothing there
Probing Memory Bank #7 Nothing there
Starting real time clock...
Incorrect configuration checksum;
Setting NVRAM parameters to default values.
Setting diag-switch? NVRAM parameter to true
Probing CPU FMI,MB86907
Probing /iommu@0,10000000/sbus@0,10001000 at 5,0 espdma esp sd st SUNW,bpp ledm
a le
Probing /iommu@0,10000000/sbus@0,10001000 at 4,0 SUNW,CS4231 power-management
Probing /iommu@0,10000000/sbus@0,10001000 at 1,0 Nothing there
Probing /iommu@0,10000000/sbus@0,10001000 at 2,0 Nothing there
Probing /iommu@0,10000000/sbus@0,10001000 at 3,0 Nothing there
Probing /iommu@0,10000000/sbus@0,10001000 at 0,0 Nothing there
SPARCstation 5, No Keyboard
ROM Rev. 2.29, 64 MB memory installed, Serial #11184810.
Ethernet address aa:aa:aa:aa:aa:aa, Host ID: aaaaaaaa.
The IDPROM contents are invalid
Boot device: /iommu/sbus/ledma@5,8400010/le@5,8c00000 File and args:
Internal loopback test -- Did not receive expected loopback packet.
Can't open boot device
Type help for more information
ok
в целом видно что все хорошо, за исключением сдохшей батарейки. Не смотря на то что плата была согнута.
Можно глянуть что за камушек стоит. Он в этой машине один, и проапгредить нельзя, так как впаян в плату
Для этого есть команда - module-info
ok module-info
CPU FMI,MB86907 Rev. 2.3 : 170.0 Mhz
SBus (Divide IOCLK By 4) : 21.2 Mhz
ok
Видно что процессор на 170 МГц, а вот шина что то медленная, всего 21.2 МГц.
