О газотурбинных двигателях
ВТ (непрофильный форум) => Уголок SUNтехника => Тема начата: случайность от 19 апреля 2018, 18:49:58
-
Solaris 2.5.1
Выпущена в ноябре 1995 года версия 2.5, В мае 1996 года появляется версия 2.5.1 - это единственная версия которая поддерживает Power PC.
К меня есть коробочная версия Solaris 2.5.1 Для архитектуры Sparc. В комплекте дисков так же есть диск от мая 1996 года, в котором указана архитектура Power PC. (Desktop 1.1). На фото внизу это самая левая коробка.
Эту коробку я лично сам распечатывал, так что система не пользованая, и сохранились ключи от разного софта.
Так же этой системе есть диск руссификации.
запуск установки производится по команде
boot cdrom
<#0> ok boot cdrom
Boot device: /iommu/sbus/espdma@f,400000/esp@f,800000/sd@6,0:d File and args:
SunOS Release 5.5.1 Version Generic_103640-12 [UNIX(R) System V Release 4.0]
Copyright (c) 1983-1996, Sun Microsystems, Inc.
WARNING: TOD clock not initialized -- CHECK AND RESET THE DATE!
Configuring the /devices directory
Configuring the /dev directory
The system is coming up. Please wait.
Здесь идет ругательство на время, так как батарейку то поменял, а время не поставил.
-
Установка прогрузилась и видим в терминале такое окно.
Нам надо выбрать тип терминала. От выбора зависит удобство пользования инсталятором. Часто строки расползаются. Но в в любом случае установку можно выполнить.
What type of terminal are you using?
1) ANSI Standard CRT
2) DEC VT52
3) DEC VT100
4) Heathkit 19
5) Lear Siegler ADM31
6) PC Console
7) Sun Command Tool
8 ) Sun Workstation
9) Televideo 910
10) Televideo 925
11) Wyse Model 50
12) X Terminal Emulator (xterms)
13) Other
Type the number of your choice and press Return:
выбираем 6. все же наиболее удобное из всего что там предлагают
-
теперь первое окно теминала,
The Solaris Installation Program
You are now interacting with the Solaris installation program. The
program is divided into a series of short sections. At the end of each
section, you will see a summary of the choices you've made, and be given
the opportunity to make changes.
As you work with the program, you will complete one or more of the
following tasks:
1 - Identify peripheral devices
2 - Identify your system
3 - Install Solaris software
About navigation...
- The mouse cannot be used
- If your keyboard does not have function keys, or they do not respond,
press ESC; the legend at the bottom of the screen will change to show
the ESC keys to use for navigation.
F2_Continue F6_Help
Описана процедура установки системы,
Идентификация переферийных устройств, идентификация системы, установка программ. Так же отдлеьно написано что мыша не будет работать.
для продолжения просит нажать F2. Что будет сделано.
-
Второе окно терминала
Identify This System
On the next screens, you must identify this system as networked or
non-networked, and set the default time zone and date/time.
If this system is networked, the software will try to find the information
it needs to identify your system; you will be prompted to supply any
information it cannot find.
> To begin identifying this system, press F2.
F2_Continue F6_Help
Описывается что будет произведено далее, сетевая машина или нет, установка временной зоны и времени. Если система сетевая то будут произведены настройки сети
Для продолжения следует нажать F2
-
Третье окно терминала,
Настройка имени хоста
Host Name
On this screen you must enter your host name, which identifies this system
on the network. The name must be unique within your domain; creating a
duplicate host name will cause problems on the network after you install
Solaris.
A host name must be at least two characters; it can contain letters,
digits, and minus signs (-).
Host name:_
F2_Continue F6_Help
Предлагается ввести имя хоста, используя буквы, цифры и знак минус. Имя должно быть не менее чем из двух знаков
Вводим SS-20, и для продолжения жмем F2
-
в данном окне нам предлагается указать сетевая система или нет, по умолчанию стоит сетевая.
Для изменения на несетевая, нужно нахать стрелку вниз, а потом ентер.
для продолжения F2
Network Connectivity
On this screen you must specify whether this system is connected to a
network. If you specify Yes, the system should be connected to the network
by an Ethernet or similar network adapter.
> To make a selection, use the arrow keys to highlight the option and
press Return to mark it [X].
Networked
---------
[X] Yes
[ ] No
F2_Continue F6_Help
-
Окно ввода IP адреса. Его надо указать в поле для ввода. В моем случае 192.168.1.7
После ввода адреса нажимаем F2 для перехода к следующему окну
IP Address
On this screen you must enter the Internet Protocol (IP) address for this
system. It must be unique and follow your site's address conventions, or a
system/network failure could result.
IP addresses contain four sets of numbers separated by periods (for example
129.200.9.1).
IP address:
192.168.1.7
F2_Continue F6_Help
-
окно подтверждения введеной ранее информации,
имя хоста,
сетевая машина
IP адрес
Если все правильно жмем F2. Если что то надо изменить то жмем на F4
Confirm Information
> Confirm the following information. If it is correct, press F2;
to change any information, press F4.
Host name: SS-20
Networked: Yes
IP address: 192.168.1.7
F2_Continue F4_Change F6_Help
-
окно выбора сервиса DNS. Сразу скажу что точно не знаю что надо выбирать.
Для выбора надо стрелками выбрать нужный пункт и нажать ввод., для продолжения F2
Name Service
On this screen you must provide name service information. Select NIS+ or
NIS if this system is known to the name server; select Other if your site
is using another name service (for example, DCE or DNS); select None if
your site is not using a name service, or if it is not yet established.
> To make a selection, use the arrow keys to highlight the option
and press Return to mark it [X].
Name service
---------------------
[X] NIS+
[ ] NIS (formerly yp)
[ ] Other
[ ] None
F2_Continue F6_Help
я выбрал Other. Так как судя по описанию это позволяет указать DNS сервер.
-
окно подтверждения выбора сервиса имен
Если все правильно то можно нажать для продолжения F2. Для возврата назад F4
Confirm Information
> Confirm the following information. If it is correct, press F2;
to change any information, press F4.
Name service: Other
F2_Continue F4_Change F6_Help
-
Подсети,
Устанавливаем на YES. По умолчанию стоит на NO. и жмем Ввод
Subnets
On this screen you must specify whether this system is part of a subnet.
If you specify incorrectly, the system will have problems communicating on
the network after you reboot.
> To make a selection, use the arrow keys to highlight the option and
press Return to mark it [X].
System part of a subnet
-----------------------
[Х] Yes
[ ] No
F2_Continue F6_Help
-
Маска подсети,
по умолчанию уже введена 255.255.255.0. Так что смело жмем F2
Netmask
On this screen you must specify the netmask of your subnet. A default
netmask is shown; do not accept the default unless you are sure it is
correct for your subnet. A netmask must contain four sets of numbers
separated by periods (for example 255.255.255.0).
Netmask: 255.255.255.0
F2_Continue F6_Help
-
пусто
-
пусто
-
Выбор временной зоны
Здесь надо стрелками переместиться на пункт Europe и нажать ввод, далее нажать F2
Time Zone
On this screen you must specify your default time zone. You can specify a
time zone in three ways: select one of the geographic regions from the
list, select other - offset from GMT, or other - specify time zone file.
> To make a selection, use the arrow keys to highlight the option and
press Return to mark it [X].
Regions
----------------------------------
^ [ ] Asia, Eastern
| [ ] Asia, Western
| [ ] Australia / New Zealand
| [ ] Canada
| [X] Europe
| [ ] Mexico
| [ ] South America
| [ ] United States
| [ ] other - offset from GMT
- [ ] other - specify time zone file
F2_Continue F6_Help
-
продолжения указания временной зоны,
в данном окне так же стрелками выбираем Eastern Europe (Восточная Европа). И жмем ввод, для продолжения F2
Time Zone
> To make a selection, use the arrow keys to highlight the option and
press Return to mark it [X].
Time zones
------------------
[ ] Great Britain
[ ] Ireland
[ ] Iceland
[ ] Poland
[ ] Western Europe
[ ] Middle Europe
[X] Eastern Europe
F2_Continue F5_Cancel F6_Help
-
установка времени и даты
вводим год, месяц, день, часы, минуты
на картинке смещено все, это так глючит терминал
Date and Time
> Accept the default date and time or enter
new values.
Date and time: 04/19/18 20:29
Year (4 digits) : 2018
Month (1-12) : 04
Day (1-31) : 19
Hour (0-23) : 20
Minute (0-59) : 29
> Press F2 to go to the next screen.
F2_Continue F6_Help
-
Проверка правильности ввода информации,
подсеть,
маска сети
временная зона,
дата и время
если все праивльно жмем F2 если нет то F4
Confirm Information
> Confirm the following information. If it is correct, press F2;
to change any information, press F4.
System part of a subnet: Yes
Netmask: 255.255.255.0
Time zone: EET
Date and time: 04/19/18 20:52:00
F2_Continue F4_Change F6_Help
-
Закончен предварительный этап
в терминале можно увидеть вот такие строки
-
теперь этап установки системы.
Выбираем тип установки, выбор устанвливаемого софта, разбиение дисков
Install Solaris Software - Initial
The screens that follow let you tailor how Solaris is installed on your
system. The main tasks you must perform to install Solaris software on your
system are:
- Selecting a system type
- Selecting Solaris software
- Selecting disks to hold the software you've selected
- Specifying how files systems are laid out on the disks
After completing these tasks, a summary of your selections (called a
profile) is displayed. You can go back and change selections as many times
as you like before starting to install Solaris.
> To continue, press F2.
F2_Continue F3_Go Back F5_Exit F6_Help
-
Выбор типа системы
здесь их три
standalone
OS server
dataless client
Выбираем первый пункт, так как нам нужен обычный стационарный комп со всем софтом.
System Type
On this screen you must specify one of the following system types. A system
type determines where a system will get its directories and file systems,
and whether it provides portions of Solaris software to other systems.
> To make a selection, use the arrow keys to highlight the option
and press Return to mark it [X].
[X] Standalone
[ ] OS server
[ ] Dataless Client
F2_Continue F3_Go Back F5_Exit F6_Help
-
Выбор устанавливаемого софта.
есть несколько вариантов. Оставляем End User
даже сли ставить все что не попадя весь софт не дотягивает и до полугигабайта,
Если нажать на F4 то можно выбрать что надо, а что не надо удалить.
Software
On this screen you must select the Solaris software to install on your
system. The four software groups shown below are bundled and defined by
SunSoft. You can accept the default [X] End User System Support, or select
another.
NOTE: After selecting a software group, you can add or remove
software from it by selecting F4 to customize. However, this
requires understanding of software dependencies and how Solaris
software is packaged.
> To make a selection, use the arrow keys to highlight the option and press
Return to mark it [X]; then press F4 to customize or F2 to continue.
[ ] Entire Distribution plus OEM support .. 475.00 MB
[ ] Entire Distribution ................... 464.00 MB
[ ] Developer System Support .............. 387.00 MB
[X] End User System Support ............... 275.00 MB (F4 to Customize)
[ ] Core System Support ................... 168.00 MB
F2_Continue F3_Go Back F4_Customize F5_Exit F6_Help
-
В софте ковыряться не будем, поэтому жмем F2 и попадаем в выбор дисков.
Здесь все штатно, стрелками на диск и ввод, выбираем оба диска
Disks
On this screen you must select the disks for installing Solaris software.
Start by looking at the Suggested Minimum field; this value is the
approximate space needed to install the software you've selected. Keep
selecting disks until the Total Selected value exceeds the Suggested Minimum
value.
> To make selections, use the arrow keys to highlight options, and
press Return to mark them [X].
Disk Device (Size) Available Space
=============================================
[X] c0t3d0 (1002 MB) bootdrive 1002 MB
[X] c0t1d0 (1002 MB) 1002 MB
Total Selected: 2004 MB
Suggested Minimum: 125 MB
F2_Continue F3_Go Back F5_Exit F6_Help
-
Предложение сохранения данных на дисках. Для этого надо нажать на F4/ Это сейчас не нужно поэтому F2 и идем дальше
Preserve Data?
At least one of the disks you've selected has file systems or unnamed slices
that you may want to save.
> To save file systems or unnamed slices, press F4.
> To allow current file systems and unnamed slices to be overwritten when
Solaris software is installed, press F2.
F2_Continue F3_Go Back F4_Preserve F5_Exit F6_Help
-
Предложение авторазбивки диска.
пожалуй согласиться можно.
Это пока эксперементальная установка, так для ознакомления.
Для авторазбивки F2, для ручной F4
-
Авторазбивка диска.
выбираем все пункты, можно этого не делать, тогда все будет в виде каталогов, а не разделов диска
Auto-layout File Systems
On this screen you must select all the file system you want auto-layout to
create, or accept the defaults shown.
NOTE: For small disks (less than 200 MB), it may be necessary for
auto-layout to break up some of the file systems you request into
smaller file systems to fit the available disk space. So, after
auto-layout completes, you may find file systems in the layout that
you did not select from the list below.
File Systems for Auto-layout
========================================
[X] /
[X] swap
[X] /usr
[X] /opt
[X] /usr/openwin
[X] /var
[X]
F2_Continue F5_Cancel F6_Help
-
Показана разбивка дисков на разделы, так же можно изменить то что не нравится, для этого надо нажать F4. Если все устраивает тогда нажать F2
File System and Disk Layout
The summary below is your current file system and disk layout, based on the
information you've supplied.
NOTE: If you press F4 to customize, you should understand file
systems, their intended purpose on the disk, and how changing
them may affect the operation of the system.
> To accept the layout shown, press F2.
> To customize the layout, press F4.
File system/Mount point Disk/Slice Size
=============================================================
- / c0t3d0s0 14 MB
^ swap c0t3d0s1 128 MB
| overlap c0t3d0s2 1002 MB
| /usr/openwin c0t3d0s3 63 MB
| /var c0t3d0s4 110 MB
| /opt c0t3d0s5 113 MB
v /usr c0t3d0s6 52 MB
v /export/home c0t3d0s7 518 MB
F2_Continue F3_Go Back F4_Customize F5_Exit F6_Help
-
Предложение смонтировать удаленную файловую систему, У нас ее нет, так что пропускаем посредством F2
Mount Remote File Systems?
Do you want to mount software from a remote file server? This may be
necessary if you had to remove software because of disk space problems.
> To go to the Mount Remote File System screen, press F4.
> To bypass mounting remote file systems, press F2.
F2_Continue F3_Go Back F4_Remote Mounts F6_Help
-
Просмотр всех настроек перед установкой
Для продолжения нажать F2, для изменения F4
Profile
The information below is your profile for installing Solaris software. It is
a summary of the choices you've made on previous screens.
> To go back to the beginning to make changes, press F4.
CAUTION: If you selected system type `OS server' and allocated
space for clients, you must complete client set up by using
Solstice Host Manager after Solaris is installed
============================================================================
- System Type: Standalone
|
| Software: Solaris 2.5.1, End User System Support
|
| File System and Disk Layout: / c0t3d0s0 14 MB
| swap c0t3d0s1 128 MB
| /usr/openwin c0t3d0s3 63 MB
v /var c0t3d0s4 110 MB
F2_Continue F4_Change F5_Exit F6_Help
-
начало установки
Для этого надо нажать F2
Begin Installing Solaris
By default, your system will reboot after Solaris is installed. However,
you can bypass rebooting and access a UNIX shell to make changes before
rebooting.
> To begin installing Solaris, press F2; to go back and make changes
press F5.
[X] Reboot
[ ] Do not reboot
F2_Begin Installation F5_Cancel
-
только сейчас записывается таблица разделов. что и видно в терминале
-
Вот так выглядит установка системы в терминале
-
продолжение установки,
теперь ставятся пакеты
-
предложение подождать от 15 до 45 минут, для установки
-
Первая Загрузка только что установленной системы
-
Первое что делает только что установленная система, предлагает создать пароль для root-а
On this screen you can create a root password.
A root password can contain any number of characters, but only the first eight
characters in the password are significant. (For example, if you create
`a1b2c3d4e5f6' as your root password, you can use `a1b2c3d4' to gain root
access.)
You will be prompted to type the root password twice; for security, the
password will not be displayed on the screen as you type it.
> If you do not want a root password, press RETURN twice.
Root password:
Press Return to continue.
после первого ввода, просит повторить
-
ну вот и все, установка звершена
-
теперь можно войти в систему
-
зашел в систему, надо же проверить что за процессоры, ато где то читал что гиперспарки бывает не работают на номинале
# psrinfo -v
Status of processor 0 as of: 04/19/18 23:48:16
Processor has been on-line since 04/19/18 23:35:11.
The sparc processor operates at 125 MHz,
and has a sparc floating point processor.
Status of processor 2 as of: 04/19/18 23:48:16
Processor has been on-line since 04/19/18 23:35:15.
The sparc processor operates at 125 MHz,
and has a sparc floating point processor.
-
....